RTO Roles in GCF Certification
As a Recognized Test Organization (RTO), we ensure the highest quality of testing and certification services.
Test Plan Generation
Generation based on the latest version of NAPRD03 specifications and compliance requirements.
Test Execution
Precise execution of specified test plans using advanced laboratory facilities and live network environments.
Result Evaluation
Comprehensive evaluation to meet PTCRB compliance requirements with clear pass/fail criteria.
Our Expertise
We certify all types of products across multiple technologies and deliver comprehensive test specifications.
✓
Product Types
5G Devices, IoT Products, Connected Consumer Devices, Smartphones, Tablets, Modems, Portable Wi-Fi Hotspots, and Laptops.
✓
Technology Coverage
5G, NB-IoT, Cat-M1, LTE, WCDMA, CDMA2000, and GSM technologies fully supported.
✓
RTO Credentials
Appointed by GCF with strict criteria verification. Regular confirmation of expertise, qualifications, and technical equipment.
✓
Field Trial Services
FTAG Member with authorized execution of GCF Field Trials with real network environments.
Comprehensive Test Specifications
Browse our complete range of test technologies, methods, and coverage areas. Use the scrollbar to view all entries.
| Test Technology | Test Method(s) | Technology Area | Features Covered |
|---|---|---|---|
| Signaling Conformance | 3GPP TS 51.010-1 | GERAN | GPRS transmitter tests EGPRS transmitter tests Reference sensitivity DARP Phase 1 Speech bearer tests |
| 3GPP TS 34.123-1 | UMTS | Idle mode operations Layer 2 related Scenarios RLC testing Elementary procedures of mobility management Circuit Switched Call Control (CC) |
|
| 3GPP TS 36.523-1 | E-UTRA/NB-IoT/CatM1 | E-UTRA/NB-IoT/CatM1 Idle mode operations Inter-RAT Logged Handover Failure EMM specific procedures Dedicated EPS bearer context activation UE requested bearer resource allocation |
|
| 3GPP TS 38.523-1 | 5G NR/Red Cap | Idle mode and RRC Inactive state operations MAC, RLC, PDCP, SDAP RRC Connection Establishment, Release, Resume, Reconfiguration, Handover, UE Capability Carrier Aggregation 5GS mobility management (authentication, Security mode control, Registration, De-registration, Service request, SMS over NAS) EN-DC & 5GS session management Multi-layer and Services 5GS / EPS Fallback, Unified Access Control (UAC), Emergency Services, eCallover IMS |
|
| RF Conformance | 3GPP TS 51.010-1 | GERAN | Generic call set up procedures GPRS transmitter tests EGPRS transmitter tests Reference sensitivity DARP Phase 1 Speech bearer tests |
| 3GPP TS 34.121-1 | UMTS | Detection in Inter-Cell Handover Conditions Detection of E-DCH Relative Grant Channel (E-RGCH) Scenarios Adjacent Channel Leakage Power Ratio (ACLR) Scenarios Receiver Characteristics Scenarios |
|
| 3GPP TS 36.521-4 | E-UTRA/NB-IoT | Transmitter characteristic scenarios Receiver characteristics scenarios Performance requirement scenarios |
|
| 3GPP TS 36.521-1 | E-UTRA/NB-IoT/CatM1 | UE Maximum Output Power Scenarios Additional Spectrum Emission Mask Scenarios Reference sensitivity level related Scenarios Spurious response related Scenarios |
|
| 3GPP TS 38.521-1 | 5G NR/Red Cap | Transmitter & Receiver characteristics RF Transmitter & Receiver characteristics for carrier aggregation Demodulation performance requirements CSI reporting requirements Demodulation performance requirements for interworking |
|
| 3GPP TS 38.521-3 | 5G NR | ||
| 3GPP TS 38.521-4 | 5G NR/Red Cap | ||
| RRM Conformance | 3GPP TS 36.521-3 | E-UTRA/NB-IoT | Cell re-selection intra frequency UE Transmit Timing Accuracy Radio Link Monitoring Test Scenarios (for both Out-of-Sync & In-Sync) |
| 3GPP TS 38.533 | 5G NR/Red Cap | Radio Resource Management Testing EN-DC with all NR cells, NR standalone (state mobility, Timing, Signaling characteristics, Measurement procedures, Measurement performance requirements) |
|
| UICC Testing | 3GPP TS 31.121 | 5G,4G,3G,CAT M,WCDMA,NB-IoT | UE Identification Scenarios UE Prioritizing related Scenarios UICC interface related Scenarios SUCI calculation related Scenarios |
| 3GPP TS 31.124 | 5G,4G,3G,CAT M,WCDMA,NB-IoT | Multiple triggers: Steering of Roaming, IMSI Change, eCall mode updates, SMS-PP, etc. RAT-specific support: E-UTRAN, UTRAN/GERAN, NG-RAN Full-spectrum: Initialization, File Change, Full File Change, Session Reset |
|
| GSMA TS.27 | SIM Alliance and GP Conformance | NFC Forum Type 2 Tag – Read NFC Tag NFC Forum Type 3 Tag – Read NFC Tag NFC Forum Type 4 Tag – Read NFC Tag (Type 4A) NFC Forum Type 4 Tag – Read NFC Tag (Type 4B) NFC Forum Type 2 Tag – Write NFC Tag (Dynamic) NFC Forum Type 2 Tag – Write NFC Tag (Static) NFC Forum Type 3 Tag – Write NFC Tag NFC Forum Type 4 Tag – Write NFC Tag (Type 4A) NFC Forum Type 4 Tag – Write NFC Tag (Type 4B) NFC Type 2 Tag Reading Performance NFC Type 3 Tag Reading Performance NFC Type 4A Tag Reading Performance NFC Type 4B Tag Reading Performance NFC Type 5 Tag Reading Performance everse Polarity Behavior De-synchronization after EoD Timing Verification State Change to Read-Only Verify Mapping Version Number (T3T) NDEF Detection and Read NDEF Write Unexpected Behavior Based on Attribute Info |
|
| GSMA TS.35 | IoT Device Connection Efficiency Test Book | Default RPM Parameters behavior RPM Activation Control RPM enablement during roaming RPM disabling via SIM OTA Individual RPM requirement control via OTA RPM enable/disable flag validation RPM version verification |
|
| ETSI TS 102 695-1 | Smart Cards; Test specification for the Host Controller Interface (HCI); Part 1: Terminal features | Host Controller Interface (HCI) Terminal Features Test Specifications for Smart Cards Terminal Feature Testing Procedures |
|
| ETSI TS 102 694-1 | Smart Cards; Test specification for the Single Wire Protocol (SWP) interface; Part 1: Terminal features | Test cases for terminal features related to the Host Controller Interface (HCI). Test cases for terminal features related to the Single Wire Protocol (SWP) interface. SWP initial activation related Test Cases |
|
| ETSI TS 102 384 | Smart Cards; UICC-Terminal interface; Card Application Toolkit (CAT) conformance specification | OPEN CHANNEL (UICC Server Mode: TCP in LISTEN state, successful; with modification) CLOSE CHANNEL (UICC Server Mode: TCP in LISTEN state, successful; to TCP in CLOSED state, successful) GET CHANNEL STATUS (UICC Server Mode: in LISTEN state, in ESTABLISHED state) ACTIVATE SEQ 1.1 Contactless State Change |
|
| ETSI TS 102 230-1 | Smart Cards; Test specification for the Single Wire Protocol (SWP) interface; Part 1: Terminal features | Phase preceding Terminal power on Phase during UICC power on: 3 V - 5 V Phase during UICC power on: 1.8 V - 3 V Phase during Terminal power off: 3 V - 5 V Phase during Terminal power off: 1.8 V - 3 V Reaction of Terminals supporting voltage classes B and C on recognition of UICCs accepting voltage classes A and B Reaction of Terminals receiving no ATR: 1.8 V - 3 V Reaction of Terminals not supporting any voltage class indicated in the ATR Electrical tests on contact C1 Electrical tests on contact C2 Electrical tests on contact C3 Electrical tests on contact C7 Clock stop mode with UICC accepting voltage classes B and C Clock stop mode with UICC accepting voltage classes A and B Speed Enhancement Bit/character duration during transmission from the Terminal to the UICC Bit/character duration during transmission from the UICC to the Terminal Timing Command processing, ACK, NACK, NULL procedure bytes Case 2 command, use of procedure bytes '61xx' and '6Cxx' Case 4 command, use of procedure bytes '61xx' Command processing, warning and error status bytes Error correction Error detection |
|
| GSMA SGP.23-1 | SGP.23-1 RSP Test specification for the Euicc | Initiate Authentication Get Bound Profile Package (BPP) Authenticate Client Handle Notification Cancel Session HTTPS Session |
|
| Data Performance | 3GPP TR 37.901-5 | 5G NR | Radio Access Technology Data Protocols Duplex Modes Transmission Directions Channel Conditions Channel Models Rx Configurations PDSCH Mapping Type Frequency Ranges Split Bearer Scenarios |
| GCF Cellular Field Trials | GCF-CC Annex F 5.1 | 3GPP Cellular | Mobility performance related Test Scenarios Signaling related Test Scenarios User-plane behavior under field conditions. |
| GCF-CC Annex F 5.2 | 3GPP Cellular Field trials - IMS Field Trial Classifications | VoLTE related Test Scenarios ViLTE related Test Scenarios VoWiFi related Test Scenarios IMS service behavior |
|
| GCF-CC Annex F 5.3 | Application Enabler Interoperability Testing | Roaming Scenarios Supplementary Services Emergency Services Data Services |
|
| GCF-CC Annex F 5.4 | TS.40 (GSMA-MIoT-Field-and-Lab-Test-Cases) | Field trial Testing as per the test menthod GSMA TS 40 for NB-IOT, LTE CAT M, RedCap | |
| GCF-CC Annex F 5.5 | GSMA TS.11-MCS | MCS Field Trial Testing as per the test menthod GSMA TS 11 | |
| MCS | 3GPP TS 37.579-2 | Mission Critical Services | Configuration On-demand Pre-arranged Group Call Automatic Commencement Mode Manual Commencement Mode End-to-end Communication Security Floor Control Upgrade to Emergency Group Call Cancel Emergency State Upgrade to Imminent Peril Group Call Cancel Imminent Peril State Pre-arranged Group Call using Pre-established Session Pre-arranged Broadcast Group Call Broadcast Group Call with Temporary Group Pre-arranged Emergency Group Call Pre-arranged Imminent Peril Group Call Emergency Alert Broadcast Group Call using Pre-established Session Active Functional Alias Multi Talker No Implicit Floor Control Chat Group Call Chat Group Call Using Pre-established Session Emergency Group Call (Chat) Imminent Peril Group Call (Chat) Join Chat Group Session Upgrade to Emergency Cancel Emergency Upgrade to Imminent Peril Cancel Imminent Peril |
| IMS Signalling | 3GPP TS 34.229-1 | E-UTRA | IMS Registration and Deregistration Error Handling and Invalid Behaviour IMS Re-authentication IMS Voice and Video Calls (MTSI, EVS, AMR/AMR-WB) Identification and Presentation Services Communication Forwarding Call Hold and Call Waiting Communication Barring Messaging (SMS over IMS) MWI (Message Waiting Indicator) Subscription Conference Call Handling |
| 3GPP TS 34.229-5 | 5G NR | Registration related scenarios
call control, voice call
Supplementary Services SMS Emergency Call |
|
| SUPL | OMA-ETS-SUPL-V1_0 | Application Enabler | Network initiated SET Initiated - Correct Session ID SET Initiated SET Initiated - Common Positioning method Common Positioning method (Cell ID methods) SET Initiated - Timeout UT1 SET Initiated - Timeout UT2 – non-Cell ID SET Initiated - Timeout UT3 Network initiated – No notification & no verification Network initiated - Notification only Network initiated - Notification and verification (Allowed on no answer) – User accepts Network initiated - Notification and verification (Allowed on no answer) – User rejects Network initiated - Notification and verification (Allowed on no answer) – No response Network initiated - Notification and verification (Denied on no answer) – User accepts Network initiated - Notification and verification (Denied on no answer) – User rejects Network initiated - Notification and verification (Denied on no answer) – No response Network initiated – Requestor and Client Name – Test 1 (UCS2 coding) Network initiated – Requestor and Client Name – Test 2 (GSM-default coding) Network initiated – Requestor and Client Name – Test 3 (UTF-8 coding) |
| OMA-ETS-SUPL-V2_0 | Application Enabler | SUPL INIT delivery Incorrect OMA Push message content Incorrect MT SMS message content Correct Session ID Invalid SET Session ID Missing or invalid SLP Session ID Alternative H-SLP Addresses Optional Ciphering Suites – TSL_RSA_WITH_3DES_EDE_CBC_SHA Compatible Versions – Support for higher SUPL 2.X.X versions Compatible Versions – SLP supports SUPL V3.0 and V2.0 Compatible Versions – SLP supports SUPL V1.0 only (SET supports V1.0) Unsupported Versions – Higher version not supported Unsupported Versions – Lower version not supported (SUPL V1.0 not supported by SET) Incorrect UDP message content No notification & no verification Notification only Notification and verification Privacy override Requestor ID and Client Name Positioning method A-GANSS SET assisted No Position Emergency Services Location Requests Emergency Services Location Requests – Interaction with normal SUPL session Real Time reporting Geographic Target Area – A-GPS SET based Area ID – A-GPS SET based Network cancels Triggered Location Request Timeout UT2 Timeout UT3 Timeout UT7 Timeout UT8 Invalid SLP Session ID Positioning method – SET declares A-GNSS SET-assisted preferred method Geographic Target Area – A-GPS SET based Timeout UT1 – Immediate session |
|
| Positioning | 3GPP TS 37.571-1 | LTE/5G Positioning | Sensitivity Course Time Assistance Sensitivity Fine Time Assistance Nominal Accuracy Dynamic Range Multi-path Scenario |
| 3GPP TS 37.571-2 | LTE Positioning Generic & Protocol | UE Network Capability Location Notification Privacy Verification – Location Allowed if No Response Privacy Verification – Location Not Allowed if No Response Autonomous Self Location: UE-based Basic Self Location: UE-assisted Position Capability Transfer LPP Duplicated Message LPP Acknowledgment LPP Retransmission E-SMLC Initiated Assistance Data Delivery followed by Location Information Transfer: UE-Based E-SMLC Initiated Assistance Data Delivery followed by Location Information Transfer: UE-Assisted E-SMLC Initiated Position Measurement without Assistance Data: UE-Based E-SMLC Initiated Position Measurement without Assistance Data: UE-Assisted E-SMLC Initiated Abort |
Our Certifications & Credentials
✓
GCF Recognized
Officially recognized test organization by Global Certification Forum.
✓
IAS Certificate TL-1184
Authorized to perform GCF conformance testing and field trials.
✓
FTAG Member
Field Trial Agreement Group member for advanced field testing capabilities.
✓
GCF Conformance Certified
Full compliance with GCF conformance testing requirements.
✓
Field Trials Authorized
Authorized to conduct GCF field trials with live networks.
✓
Interoperability Testing
Comprehensive interoperability testing across multiple RATs.
